DANAU TOBA

DANAU TOBA

P

ada zaman dahulu hidup seorang yang bernama toba yang tinggal disekitar lembah pegunungan toba. Tidak ada yang tahu kapan dia datang dan dari mana dia berasal. Pemuda ini tinggal di gubuk sederhana di sebuah ladang di tepi sungai yang dikelilingi pegunungan. Dia adalah seorang nelayan dia juga mempunyai sebuah ladang suatu kali dia menemukan seekor ikan besar di dalam perangkap ikannya yang terbuat dari anyaman rotan dan hal ini akan mengubah hidupnya. Dia belum pernah menagkap sebesar ini sebelumnya. Ikan ini sungguh besar. Kemudian ia menaruh ikan tersebut di dalam gubuknya dan keluar sambil memikirkan cara memasak ikan tersebut. Setelah beberapa saat, dia kembali ke gubuknya. Dia terkejut, ikan tersebut bukanlah ikan biasa, tetapi seekor ikan ajaib. Ikan tersebut telah berubah menjadi seorang putri yang sangat cantik bernama Nauli. Sisiknya berubah menjadi hiasan batu permata yang indah dan pakaian layaknya pakaian seorang putri raja, Dia kemudian melamar putri tersebut. Katanya “Maukah engkau menjadi istriku?”. Sang putri mengangguk dengan tersipu.

          Pemuda itu sangat gembira. Sang putri mengatakan bahwa ia bersedia ia menikah dengannya dengan 1 syarat. Dia tidak akan pernah mengatakan kepada siapapun bahwa putri tersebut adalah seekor ikan. Pemuda itu setuju. Putri itu pun berkata bahwa jika dia melanggar janjinya, maka akan ada air mata dan bencana.

          Akhirnya, mereka hidup bahagia dan harmonis dengan putri tunggal mereka yang dinamai Samosir. Sesudah putri mereka bertambah besar, ibunya selalu memintanya untuk mengantar makan siang pada ayahnya yang sedang bekerja di ladang. Namun sayangnya, anak tersebut sangatlah rakus. Suatu kali, dia memakan habis semua makanan yang seharusnya diberikan kepada ayahnya. Dia kemudian berteriak kepada putrinya, “Dasar anak durhaka ! Engkau betul-betul anak ikan.” Ibunya mendengar kutukan tersebut dan mendapatkan bahwa suaminya telah melanggar janji. Setiba  dirumah, anaknya bertanya kepada ibunya yang sedang menangis. Tanpa menjawab, sang ibu menyuruh putrinya pergi ke atas bukit karena akan terjadi bencana. Setelah dia berdoa sebentar, terjadilah gempa bumi. Hujan yang sangat lebat turun dan air keluar dari dalam tanah. Tempat itu kemudian berubah menjadi Danau Toba dan bukit tersebut menjadi pulau Samosir.

SPECIFIC HEAT CAPACITY

Specific heat capacity

Temperature and heat are not the same thing:

• temperature is a measure of how hot something is
• heat is a measure of the thermal energy contained in an object.

Temperature is measured in °C, and heat is measured in J. When heat energy is transferred to an object, its temperature increase depends upon the:

• the mass of the object
• the substance the object is made from
• the amount energy transferred to the object.

For a particular object, the more heat energy transferred to it, the greater its temperature increase.

Specific heat capacity

The specific heat capacity of a substance is the amount of energy needed to change the temperature of 1 kg of the substance by 1°C. Different substances have different specific heat capacities. The table shows some examples.

Heat capacities of different substances

Substance	Specific heat capacity in J / kg °C
water	4181
oxygen	918
lead	128

Notice that water has a particularly high specific heat capacity. This makes water useful for storing heat energy, and for transporting it around the home using central heating pipes.

Calculating specific heat capacity

Here is the equation relating energy to specific heat capacity:

E = m × c × θ

• E is the energy transferred in joules, J
• m is the mass of the substances in kg
• c is the specific heat capacity in J / kg °C
• θ (‘theta’) is the temperature change in degrees Celsius, °C

For example, how much energy must be transferred to raise the temperature of 2 kg of water from 20°C to 30°C?

E = m × c × θ (θ = 30 – 20 = 10°C)

E = 2 × 4181 × 10 = 83,620 J or 83.62 kJ

Specific Heat and Heat Capacity

Specific heat is another physical property of matter. All matter has a temperature associated with it. The temperature of matter is a direct measure of the motion of the molecules: The greater the motion the higher the temperature:

Motion requires energy: The more energy matter has the higher temperature it will also have. Typicall this energy is supplied by heat. Heat loss or gain by matter is equivalent energy loss or gain.

With the observation above understood we con now ask the following question: by how much will the temperature of an object increase or decrease by the gain or loss of heat energy? The answer is given by the specific heat (S) of the object. The specific heat of an object is defined in the following way: Take an object of mass m, put in x amount of heat and carefully note the temperature rise, then S is given by

In this definition mass is usually in either grams or kilograms and temperatture is either in kelvin or degres Celcius. Note that the specific heat is "per unit mass". Thus, the specific heat of a gallon of milk is equal to the specific heat of a quart of milk. A related quantity is called the heat capacity (C). of an object. The relation between S and C is C = (mass of obect) x (specific heat of object). A table of some common specific heats and heat capacities is given below:

Some common specific heats and heat capacities:
Substance	S (J/g 0C)	C (J/0C) for 100 g
Air	1.01	101
Aluminum	0.902	90.2
Copper	0.385	38.5
Gold	0.129	12.9
Iron	0.450	45.0
Mercury	0.140	14.0
NaCl	0.864	86.4
Ice	2..03	203
Water	4.179	41.79

Consider the specific heat of copper , 0.385 J/g 0C. What this means is that it takes 0.385 Joules of heat to raise 1 gram of copper 1 degree celcius. Thus, if we take 1 gram of copper at 25 0C and add 1 Joule of heat to it, we will find that the temperature of the copper will have risen to 26 0C. We can then ask: How much heat wil it take to raise by 1 0C 2g of copper?. Clearly the answer is 0.385 J for each gram or 2x0.385 J = 0.770 J. What about a pound of copper? A simple way of dealing with different masses of matter is to dtermine the heat capacity C as defined above. Note that C depends upon the size of the object as opposed to S that does not.

We are not in position to do some calculations with S and C.

Example 1: How much energy does it take to raise the temperature of 50 g of copper by 10 0C?

Example 2: If we add 30 J of heat to 10 g of aluminum, by how much will its temperature increase?

Thus, if the initial temperture of the aluminum was 20 0C then after the heat is added the temperature will be 28.3 0C.

Specific Heat Capacity

The specific heat capacity of a solid or liquid is defined as the heat required to raise unit mass of substance by one degree of temperature. This can be stated by the following equation:

where,
Q= Heat supplied to substance,
m= Mass of the substance,
c= Specific heat capacity,
T= Temperature rise.

There are two definitions for vapors and gases:
Cp = Specific heat capacity at constant pressure, i.e.

Cv = Specific heat capacity at constant volume, i.e.

It can be shown that for a perfect gas:

where R is the gas constant. The ratio, Cp/Cv, has been given symbol ,

and is always greater than unity. The approximate value of this ratio is 1.6 for monatomic gases such as Ar and He. Diatomic gases (such as H2, N2, CO and O2) have a g ratio about 1.4 and triatomics (such as SO2 and CO2) 1.3.

Specific Heat Capacity Table

Substance	Specific Heat Capacity  at 25oC in J/goC
H2 gas	14.267
He gas	5.300
H2O(l)	4.184
lithium	3.56
ethyl alcohol	2.460
ethylene glycol	2.200
ice @ 0oC	2.010
steam @ 100oC	2.010
vegetable oil	2.000
sodium	1.23
air	1.020
magnesium	1.020
aluminum	0.900
Concrete	0.880
glass	0.840
potassium	0.75
sulphur	0.73
calcium	0.650
iron	0.444
nickel	0.440
zinc	0.39
copper	0.385
brass	0.380
sand	0.290
silver	0.240
tin	0.21
lead	0.160
mercury	0.14
gold	0.129

Heat energy

The jam in a sponge pudding stays hotter for longer than the pudding around it
Water is a very good coolant for use in engines
Saucepans are made of materials with a low mass if possible
It takes a long time to heat up enough water to have a hot bath
Houses built with thick stone walls keep warm in winter and stay cool in summer
People used to warm up heavy china teapots before putting the hot water and tea in them
Storage radiators are used to retain heat energy for use later in the day
You can put out a candle flame (temperature 800 ^oC) with moist fingers without pain but putting your hand into a bowl of boiling water (100 ^oC) would hurt a lot!
Electronic circuits are built with "heat sinks"
When you run "hot" water into a basin it cools as soon as it touches the material of the basin
Liquid sodium is used as a coolant in some nuclear reactors

All these facts are related to heat energy and to a quantity known as specific heat capacity and we can explain them by looking more closely at heat energy.
Over the past few centuries scientists have put forward some very strange theories about the nature of heat. One of these was that heat was some sort of a fluid that you added to a body to make it hot and took away from a body to cool it down.

However, during the last century two men, Rumford and Joule, both proposed the idea that heat was related to energy. When heat energy passes into a body it increases the internal energy of the body. Rumford demonstrated this in some well-known experiments in cannon boring and Joule showed that the friction generated between a paddle wheel and some water would heat up the water.

We can summarise these results as:

To heat up a substance requires energy. This energy increases the internal energy of the substance by increasing the kinetic energy of its molecules and so the temperature of the substance rises

Heat capacity and specific heat capacity

The amount of heat energy needed to change the temperature of a substance depends on:
(a) what the substance is;
(b) how much of it is being heated;
(c) what rise in temperature occurs.

The heat energy needed to raise the temperature of an object by 1 K is called the HEAT CAPACITY of the object.

However, a rather more useful quantity is the heat energy needed for 1 kg only.

The SPECIFIC HEAT CAPACITY of a substance is the heat needed to raise the temperature of 1 kg of the substance by 1K (or by 1^oC).

Specific heat capacity is given the symbol c. The units for c are J/(kg K) or J/(kg^oC).
The values for the specific heat capacities of some common substances are given in the following table:

Substance	Specific heat capacity (J/(kgK)	Substance	Specific heat capacity (J/(kgK)
Water	4200	Aluminium	913
Cast iron	500	Brick	2300
Copper	385	Concrete	3350
Lead	126	Marble	880

Remember that substances with high specific heat capacities take a lot of heat energy and therefore a long time to heat up and also a long time to cool down.

One interesting effect is the way in which the land heats up quicker than the sea - the specific heat capacity of sea water is greater than that of the land and so more heat energy is needed to heat it up by the same amount as the land and so it takes longer. It also takes longer to cool down.

The heat energy needed to raise the temperature of m kg of a substance of specific heat capacity c by a certain temperature difference is given by the equation:

Heat energy = mass x specific heat capacity x temperature change

If the object cools then it gives out heat energy and if it heats up it takes in heat energy.

Example problems
1. How much heat energy is needed to raise the temperature of 3 kg of copper by 6 K?
(Specific heat capacity of copper = 385 J/(kg K)
Heat energy = mass x specific heat capacity x temperature change = 3 x 385x 6 = 6930J

2. What is the rise in temperature of 5 kg of water if it is given 84 000 J of heat energy?
Specific heat capacity of water = 4200 J/(kg K).
Heat energy input = 84000 = 5x4200x temperature rise
Temperature rise = 84000/[5x4200] = 4 K

3. How much heat is lost by 3 kg of lead when it cools from 1000 ^oC to 200 ^oC?
Specifc heat capacity of lead = 126 J/(kg K)
Heat energy given out = 3x126x80 = 30240J

4. A heater of 800W is use to heat a 600 g cast iron cooker plate.
How long will it take to raise the temperature of the plate by 200 ^oC?
Specific heat capacity of iron = 500 J/(kg K)
Heat energy needed = 0.6x500x200 = 60 000J
Time needed = 60 000/500 = 120 s = 2 minutes

Conversion of mechanical energy to heat

When an object falls to the ground, the potential energy that it had at the top is converted to kinetic energy that finally becomes heat energy.
Assuming no loss of energy to any other forms we can work out the rise in temperature of water falling over a high waterfall.

Example problem
Height of waterfall 84 m.
Consider a mass of water m kg
Specific heat capacity of water = 4200 J/(kg^oC).
Gravitational field of the Earth = 10 N/kg
Potential energy lost = Heat energy gained
m x10 x 84 = m x 4200 x temperature rise
Temperature rise = [10 x 84]/4200 = 0.2^oC.

There must be no residual kinetic energy of spray and no sound must be made! (Clearly not true but it is the best we can do without making the problem very difficult).

This conversion of gravitational potential energy into heat energy can be used in the laboratory to measure the specific heat capacity of lead shot.

Example problem
Length of cardboard tube = 1 m
Mass of lead shot = m kg
The tube is upended ten times giving a total height fallen of 10m
Temperature rise 0.80 ^oC
Heat energy gained by the lead shot = potential energy lost by the lead shot
Expressed as a formula:   m x specific heat capacity x 0.8 =m x10x10
Therefore specific heat capacity of lead = 10x10/0.8 = 125 J/(kg^oC)

Heat capacity (usually denoted by a capital C, often with subscripts), or thermal capacity, is the measurable physical quantity that shows the amount of heat required to change the temperature of a substance by a given amount. In the International System of Units (SI), heat capacity is expressed in units of joule(s) (J) per kelvin (K).

Derived quantities that specify heat capacity as an intensive property, i.e., independent of the size of a sample, are the molar heat capacity, which is the heat capacity per mole of a pure substance, and the specific heat capacity, often simply called specific heat, which is the heat capacity per unit mass of a material. Occasionally, in engineering contexts, a volumetric heat capacity is used. Because heat capacities of materials tend to mirror the number of atoms or particles they contain, when intensive heat capacities of various substances are expressed directly or indirectly per particle number, they tend to vary within a much more narrow range.

Temperature reflects the average kinetic energy of particles in matter while heat is the transfer of thermal energy from high to low temperature regions. Thermal energy transmitted by heat is stored as kinetic energy of atoms as they move, and in molecules as they rotate. Additionally, some thermal energy may be stored as the potential energy associated with higher-energy modes of vibration, whenever they occur in interatomic bonds in any substance. Translation, rotation, and a combination of the two types of energy in vibration (kinetic and potential) of atoms represent the degrees of freedom of motion which classically contribute to the heat capacity of atomic matter (loosely bound electrons occasionally also participate). On a microscopic scale, each system particle absorbs thermal energy among the few degrees of freedom available to it, and at high enough temperatures, this process contributes to a specific heat capacity that classically approaches a value per mole of particles that is set by the Dulong-Petit law. This limit, which is about 25 joules per kelvin for each mole of atoms, is achieved by many solid substances at room temperature (see table below).

For quantum mechanical reasons, at any given temperature, some of these degrees of freedom may be unavailable, or only partially available, to store thermal energy. In such cases, the specific heat capacity will be a fraction of the maximum. As the temperature approaches absolute zero, the specific heat capacity of a system also approaches zero, due to loss of available degrees of freedom. Quantum theory can be used to quantitatively predict specific heat capacities in simple systems.

Background

Before the development of modern thermodynamics, it was thought that heat was a fluid, the so-called caloric. Bodies were capable of holding a certain amount of this fluid, hence the term heat capacity, named and first investigated by Joseph Black in the 1750s.^[1] Today one instead discusses the internal energy of a system. This is made up of its microscopic kinetic and potential energy. Heat is no longer considered a fluid. Rather, it is a transfer of disordered energy at the microscopic level. Nevertheless, at least in English, the term "heat capacity" survives. Some other languages prefer the term thermal capacity, which is also sometimes used in English.

Older units and English units

An older unit of heat is the kilogram-calorie (Cal), originally defined as the energy required to raise the temperature of one kilogram of water by one degree Celsius, typically from 15 to 16 °C. The specific heat capacity of water on this scale would therefore be exactly 1 Cal/(°C·kg). However, due to the temperature-dependence of the specific heat, a large number of different definitions of the calorie came into being. Whilst once it was very prevalent, especially its smaller cgs variant the gram-calorie (cal), defined so that the specific heat of water would be 1 cal/(K·g), in most fields the use of the calorie is now archaic.
In the United States other units of measure for heat capacity may be quoted in disciplines such as construction, civil engineering, and chemical engineering. A still common system is the English Engineering Units in which the mass reference is pound mass and the temperature is specified in degrees Fahrenheit or Rankine. One (rare) unit of heat is the pound calorie (lb-cal), defined as the amount of heat required to raise the temperature of one pound of water by one degree Celsius. On this scale the specific heat of water would be 1 lb-cal/(K·lb). More common is the British thermal unit, the standard unit of heat in the U.S. construction industry. This is defined such that the specific heat of water is 1 BTU/(°F·lb).

Extensive and intensive quantities

An object's heat capacity (symbol C) is defined as the ratio of the amount of heat energy transferred to an object to the resulting increase in temperature of the object,

In the International System of Units, heat capacity has the unit joules per kelvin.
Heat capacity is an extensive property, meaning it is a physical property that scales with the size of a physical system. A sample containing twice the amount of substance as another sample requires the transfer of twice the amount of heat ( ) to achieve the same change in temperature ( ).
For many experimental and theoretical purposes it is more convenient to report heat capacity as an intensive property - an intrinsic characteristic of a particular substance. This is most often accomplished by expressing the property in relation to a unit of mass. In science and engineering, such properties are often prefixed with the term specific.^[2] International standards now recommend that specific heat capacity always refer to division by mass.^[3] The units for the specific heat capacity are .
In chemistry, heat capacity is often specified relative to one mole, the unit of amount of substance, and is called the molar heat capacity. It has the unit .
For some considerations it is useful to specify the volume-specific heat capacity, commonly called volumetric heat capacity, which is the heat capacity per unit volume and has SI units . This is used almost exclusively for liquids and solids, since for gases it may be confused with specific heat capacity at constant volume.

Metrology, the measurement of heat capacity

The heat capacity of most systems is not a constant. Rather, it depends on the state variables of the thermodynamic system under study. In particular it is dependent on temperature itself, as well as on the pressure and the volume of the system, and the ways in which pressures and volumes have been allowed to change while the system has passed from one temperature to another. The reason for this is that pressure-volume work done to the system raises its temperature by a mechanism other than heating, while pressure-volume work done by the system absorbs heat without raising the system's temperature.
Different measurements of heat capacity can therefore be performed, most commonly either at constant pressure or at constant volume. The values thus measured are usually subscripted (by p and V, respectively) to indicate the definition. Gases and liquids are typically also measured at constant volume. Measurements under constant pressure produce larger values than those at constant volume because the constant pressure values also include heat energy that is used to do work to expand the substance against the constant pressure as its temperature increases. This difference is particularly notable in gases where values under constant pressure are typically 30% to 66.7% greater than those at constant volume.^{[citation needed]}
The specific heat capacities of substances comprising molecules (as distinct from monatomic gases) are not fixed constants and vary somewhat depending on temperature. Accordingly, the temperature at which the measurement is made is usually also specified. Examples of two common ways to cite the specific heat of a substance are as follows:

• Water (liquid): c_p = 4.1855 [J/(g·K)] (15 °C, 101.325 kPa)
• Water (liquid): C_vH = 74.539 J/(mol·K) (25 °C)

For liquids and gases, it is important to know the pressure to which given heat-capacity data refer. Most published data are given for standard pressure. However, quite different standard conditions for temperature and pressure have been defined by different organizations. The International Union of Pure and Applied Chemistry (IUPAC) changed its recommendation from one atmosphere to the round value 100 kPa (≈750.062 Torr).^{[notes 1]}

Calculation from first principles

The path integral Monte Carlo method is a numerical approach for determining the values of heat capacity, based on quantum dynamical principles. However, good approximations can be made for gases in many states using simpler methods outlined below. For many solids composed of relatively heavy atoms (atomic number > iron), at non-cryogenic temperatures, the heat capacity at room temperature approaches 3R = 24.94 joules per kelvin per mole of atoms (Dulong–Petit law, R is the gas constant). Low temperature approximations for both gases and solids at temperatures less than their characteristic Einstein temperatures or Debye temperatures can be made by the methods of Einstein and Debye discussed below.

Thermodynamic relations and definition of heat capacity

The internal energy of a closed system changes either by adding heat to the system or by the system performing work. Written mathematically we have

For work as a result of an increase of the system volume we may write,

If the heat is added at constant volume, then the second term of this relation vanishes and one readily obtains

This defines the heat capacity at constant volume, C_V. Another useful quantity is the heat capacity at constant pressure, C_P. With the enthalpy of the system given by

our equation for dU changes to

and therefore, at constant pressure, we have

Relation between heat capacities

Main article: Relations between heat capacities

Measuring the heat capacity, sometimes referred to as specific heat, at constant volume can be prohibitively difficult for liquids and solids. That is, small temperature changes typically require large pressures to maintain a liquid or solid at constant volume implying the containing vessel must be nearly rigid or at least very strong (see coefficient of thermal expansion and compressibility). Instead it is easier to measure the heat capacity at constant pressure (allowing the material to expand or contract freely) and solve for the heat capacity at constant volume using mathematical relationships derived from the basic thermodynamic laws. Starting from the fundamental Thermodynamic Relation one can show

where the partial derivatives are taken at constant volume and constant number of particles, and constant pressure and constant number of particles, respectively.
This can also be rewritten

where

is the coefficient of thermal expansion,

is the isothermal compressibility.

The heat capacity ratio or adiabatic index is the ratio of the heat capacity at constant pressure to heat capacity at constant volume. It is sometimes also known as the isentropic expansion factor.

Ideal gas

^[4] For an ideal gas, evaluating the partial derivatives above according to the equation of state where R is the gas constant for an ideal gas

→ =

→

substituting

=

this equation reduces simply to Mayer's relation,

Specific heat capacity

The specific heat capacity of a material on a per mass basis is

which in the absence of phase transitions is equivalent to

where

is the heat capacity of a body made of the material in question,

is the mass of the body,

is the volume of the body, and

is the density of the material.

For gases, and also for other materials under high pressures, there is need to distinguish between different boundary conditions for the processes under consideration (since values differ significantly between different conditions). Typical processes for which a heat capacity may be defined include isobaric (constant pressure, ) or isochoric (constant volume, ) processes. The corresponding specific heat capacities are expressed as

From the results of the previous section, dividing through by the mass gives the relation

A related parameter to is , the volumetric heat capacity. In engineering practice, for solids or liquids often signifies a volumetric heat capacity, rather than a constant-volume one. In such cases, the mass-specific heat capacity (specific heat) is often explicitly written with the subscript , as . Of course, from the above relationships, for solids one writes

For pure homogeneous chemical compounds with established molecular or molar mass or a molar quantity is established, heat capacity as an intensive property can be expressed on a per mole basis instead of a per mass basis by the following equations analogous to the per mass equations:

= molar heat capacity at constant pressure

= molar heat capacity at constant volume

where n = number of moles in the body or thermodynamic system. One may refer to such a per mole quantity as molar heat capacity to distinguish it from specific heat capacity on a per mass basis.

Polytropic heat capacity

The polytropic heat capacity is calculated at processes if all the thermodynamic properties (pressure, volume, temperature) change

= molar heat capacity at polytropic process

The most important polytropic processes run between the adiabatic and the isotherm functions, the polytropic index is between 1 and the adiabatic exponent (γ or κ)

Dimensionless heat capacity

The dimensionless heat capacity of a material is

where

C is the heat capacity of a body made of the material in question (J/K)

n is the amount of substance in the body (mol)

R is the gas constant (J/(K·mol))

N is the number of molecules in the body. (dimensionless)

k is Boltzmann’s constant (J/(K·molecule))

In the ideal gas article, dimensionless heat capacity is expressed as , and is related there directly to half the number of degrees of freedom per particle. This holds true for quadratic degrees of freedom, a consequence of the equipartition theorem.
More generally, the dimensionless heat capacity relates the logarithmic increase in temperature to the increase in the dimensionless entropy per particle , measured in nats.

Alternatively, using base 2 logarithms, C^* relates the base-2 logarithmic increase in temperature to the increase in the dimensionless entropy measured in bits.^[5]

Heat capacity at absolute zero

From the definition of entropy

the absolute entropy can be calculated by integrating from zero kelvins temperature to the final temperature T_f

The heat capacity must be zero at zero temperature in order for the above integral not to yield an infinite absolute entropy, which would violate the third law of thermodynamics. One of the strengths of the Debye model is that (unlike the preceding Einstein model) it predicts the proper mathematical form of the approach of heat capacity toward zero, as absolute zero temperature is approached.

Negative heat capacity (stars)

Most physical systems exhibit a positive heat capacity. However, even though it can seem paradoxical at first,^[6][7] there are some systems for which the heat capacity is negative. These include gravitating objects such as stars; and also sometimes some nano-scale clusters of a few tens of atoms, close to a phase transition.^[8] A negative heat capacity can result in a negative temperature.
According to the virial theorem, for a self-gravitating body like a star or an interstellar gas cloud, the average potential energy U_Pot and the average kinetic energy U_Kin are locked together in the relation

The total energy U (= U_Pot + U_Kin) therefore obeys

If the system loses energy, for example by radiating energy away into space, the average kinetic energy and with it the average temperature actually increases. The system therefore can be said to have a negative heat capacity.^[9]
A more extreme version of this occurs with black holes. According to black hole thermodynamics, the more mass and energy a black hole absorbs, the colder it becomes. In contrast, if it is a net emitter of energy, through Hawking radiation, it will become hotter and hotter until it boils away.

Theory of heat capacity

Factors that affect specific heat capacity

Molecules undergo many characteristic internal vibrations. Potential energy stored in these internal degrees of freedom contributes to a sample’s energy content, ^{[10] [11]} but not to its temperature. More internal degrees of freedom tend to increase a substance's specific heat capacity, so long as temperatures are high enough to overcome quantum effects.

For any given substance, the heat capacity of a body is directly proportional to the amount of substance it contains (measured in terms of mass or moles or volume). Doubling the amount of substance in a body doubles its heat capacity, etc.
However, when this effect has been corrected for, by dividing the heat capacity by the quantity of substance in a body, the resulting specific heat capacity is a function of the structure of the substance itself. In particular, it depends on the number of degrees of freedom that are available to the particles in the substance, each of which type of freedom allows substance particles to store energy. The translational kinetic energy of substance particles is only one of the many possible degrees of freedom which manifests as temperature change, and thus the larger the number of degrees of freedom available to the particles of a substance other than translational kinetic energy, the larger will be the specific heat capacity for the substance. For example, rotational kinetic energy of gas molecules stores heat energy in a way that increases heat capacity, since this energy does not contribute to temperature.
In addition, quantum effects require that whenever energy be stored in any mechanism associated with a bound system which confers a degree of freedom, it must be stored in certain minimal-sized deposits (quanta) of energy, or else not stored at all. Such effects limit the full ability of some degrees of freedom to store energy when their lowest energy storage quantum amount is not easily supplied at the average energy of particles at a given temperature. In general, for this reason, specific heat capacities tend to fall at lower temperatures where the average thermal energy available to each particle degree of freedom is smaller, and thermal energy storage begins to be limited by these quantum effects. Due to this process, as temperature falls toward absolute zero, so also does heat capacity.

Degrees of freedom

Main article: degrees of freedom (physics and chemistry)

Molecules are quite different from the monatomic gases like helium and argon. With monatomic gases, thermal energy comprises only translational motions. Translational motions are ordinary, whole-body movements in 3D space whereby particles move about and exchange energy in collisions—like rubber balls in a vigorously shaken container (see animation here). These simple movements in the three dimensions of space mean individual atoms have three translational degrees of freedom. A degree of freedom is any form of energy in which heat transferred into an object can be stored. This can be in translational kinetic energy, rotational kinetic energy, or other forms such as potential energy in vibrational modes. Only three translational degrees of freedom (corresponding to the three independent directions in space) are available for any individual atom, whether it is free, as a monatomic molecule, or bound into a polyatomic molecule.
As to rotation about an atom's axis (again, whether the atom is bound or free), its energy of rotation is proportional to the moment of inertia for the atom, which is extremely small compared to moments of inertia of collections of atoms. This is because almost all of the mass of a single atom is concentrated in its nucleus, which has a radius too small to give a significant moment of inertia. In contrast, the spacing of quantum energy levels for a rotating object is inversely proportional to its moment of inertia, and so this spacing becomes very large for objects with very small moments of inertia. For these reasons, the contribution from rotation of atoms on their axes is essentially zero in monatomic gases, because the energy spacing of the associated quantum levels is too large for significant thermal energy to be stored in rotation of systems with such small moments of inertia. For similar reasons, axial rotation around bonds joining atoms in diatomic gases (or along the linear axis in a linear molecule of any length) can also be neglected as a possible "degree of freedom" as well, since such rotation is similar to rotation of monatomic atoms, and so occurs about an axis with a moment of inertia too small to be able to store significant heat energy.
In polyatomic molecules, other rotational modes may become active, due to the much higher moments of inertia about certain axes which do not coincide with the linear axis of a linear molecule. These modes take the place of some translational degrees of freedom for individual atoms, since the atoms are moving in 3-D space, as the molecule rotates. The narrowing of quantum mechanically determined energy spacing between rotational states results from situations where atoms are rotating around an axis that does not connect them, and thus form an assembly that has a large moment of inertia. This small difference between energy states allows the kinetic energy of this type of rotational motion to store heat energy at ambient temperatures. Furthermore (although usually at higher temperatures than are able to store heat in rotational motion) internal vibrational degrees of freedom also may become active (these are also a type of translation, as seen from the view of each atom). In summary, molecules are complex objects with a population of atoms that may move about within the molecule in a number of different ways (see animation at right), and each of these ways of moving is capable of storing energy if the temperature is sufficient.
The heat capacity of molecular substances (on a "per-atom" or atom-molar, basis) does not exceed the heat capacity of monatomic gases, unless vibrational modes are brought into play. The reason for this is that vibrational modes allow energy to be stored as potential energy in intra-atomic bonds in a molecule, which are not available to atoms in monatomic gases. Up to about twice as much energy (on a per-atom basis) per unit of temperature increase can be stored in a solid as in a monatomic gas, by this mechanism of storing energy in the potentials of interatomic bonds. This gives many solids about twice the atom-molar heat capacity at room temperature of monatomic gases.
However, quantum effects heavily affect the actual ratio at lower temperatures (i.e., much lower than the melting temperature of the solid), especially in solids with light and tightly bound atoms (e.g., beryllium metal or diamond). Polyatomic gases store intermediate amounts of energy, giving them a "per-atom" heat capacity that is between that of monatomic gases (³⁄₂ R per mole of atoms, where R is the ideal gas constant), and the maximum of fully excited warmer solids (3 R per mole of atoms). For gases, heat capacity never falls below the minimum of ³⁄₂ R per mole (of molecules), since the kinetic energy of gas molecules is always available to store at least this much thermal energy. However, at cryogenic temperatures in solids, heat capacity falls toward zero, as temperature approaches absolute zero.

Example of temperature-dependent specific heat capacity, in a diatomic gas

To illustrate the role of various degrees of freedom in storing heat, we may consider nitrogen, a diatomic molecule that has five active degrees of freedom at room temperature: the three comprising translational motion plus two rotational degrees of freedom internally. Although the constant-volume molar heat capacity of nitrogen at this temperature is five-thirds that of monatomic gases, on a per-mole of atoms basis, it is five-sixths that of a monatomic gas. The reason for this is the loss of a degree of freedom due to the bond when it does not allow storage of thermal energy. Two separate nitrogen atoms would have a total of six degrees of freedom—the three translational degrees of freedom of each atom. When the atoms are bonded the molecule will still only have three translational degrees of freedom, as the two atoms in the molecule move as one. However, the molecule cannot be treated as a point object, and the moment of inertia has increased sufficiently about two axes to allow two rotational degrees of freedom to be active at room temperature to give five degrees of freedom. The moment of inertia about the third axis remains small, as this is the axis passing through the centres of the two atoms, and so is similar to the small moment of inertia for atoms of a monatomic gas. Thus, this degree of freedom does not act to store heat, and does not contribute to the heat capacity of nitrogen. The heat capacity per atom for nitrogen (5/2 per mole molecules = 5/4 per mole atoms) is therefore less than for a monatomic gas (3/2 per mole molecules or atoms), so long as the temperature remains low enough that no vibrational degrees of freedom are activated.^[12]
At higher temperatures, however, nitrogen gas gains two more degrees of internal freedom, as the molecule is excited into higher vibrational modes that store thermal energy. Now the bond is contributing heat capacity, and is contributing more than if the atoms were not bonded. With full thermal excitation of bond vibration, the heat capacity per volume, or per mole of gas molecules approaches seven-thirds that of monatomic gases. Significantly, this is seven-sixths of the monatomic gas value on a mole-of-atoms basis, so this is now a higher heat capacity per atom than the monatomic figure, because the vibrational mode enables for diatomic gases allows an extra degree of potential energy freedom per pair of atoms, which monatomic gases cannot possess.^[13] See thermodynamic temperature for more information on translational motions, kinetic (heat) energy, and their relationship to temperature.
However, even at these large temperatures where gaseous nitrogen is able to store 7/6^ths of the energy per atom of a monatomic gas (making it more efficient at storing energy on an atomic basis), it still only stores 7/12 ^ths of the maximal per-atom heat capacity of a solid, meaning it is not nearly as efficient at storing thermal energy on an atomic basis, as solid substances can be. This is typical of gases, and results because many of the potential bonds which might be storing potential energy in gaseous nitrogen (as opposed to solid nitrogen) are lacking, because only one of the spatial dimensions for each nitrogen atom offers a bond into which potential energy can be stored without increasing the kinetic energy of the atom. In general, solids are most efficient, on an atomic basis, at storing thermal energy (that is, they have the highest per-atom or per-mole-of-atoms heat capacity).

Per mole of...

Per mole of molecules

When the specific heat capacity, c, of a material is measured (lowercase c means the unit quantity is in terms of mass), different values arise because different substances have different molar masses (essentially, the weight of the individual atoms or molecules). In solids, thermal energy arises due to the number of atoms that are vibrating. "Molar" heat capacity per mole of molecules, for both gases and solids, offer figures which are arbitrarily large, since molecules may be arbitrarily large. Such heat capacities are thus not intensive quantities for this reason, since the quantity of mass being considered can be increased without limit.

Per mole of atoms

Conversely, for molecular-based substances (which also absorb heat into their internal degrees of freedom), massive, complex molecules with high atomic count—like octane—can store a great deal of energy per mole and yet are quite unremarkable on a mass basis, or on a per-atom basis. This is because, in fully excited systems, heat is stored independently by each atom in a substance, not primarily by the bulk motion of molecules.
Thus, it is the heat capacity per-mole-of-atoms, not per-mole-of-molecules, which is the intensive quantity, and which comes closest to being a constant for all substances at high temperatures. This relationship was noticed empirically in 1819, and is called the Dulong-Petit law, after its two discoverers.^[14] Historically, the fact that specific heat capacities are approximately equal when corrected by the presumed weight of the atoms of solids, was an important piece of data in favor of the atomic theory of matter.
Because of the connection of heat capacity to the number of atoms, some care should be taken to specify a mole-of-molecules basis vs. a mole-of-atoms basis, when comparing specific heat capacities of molecular solids and gases. Ideal gases have the same numbers of molecules per volume, so increasing molecular complexity adds heat capacity on a per-volume and per-mole-of-molecules basis, but may lower or raise heat capacity on a per-atom basis, depending on whether the temperature is sufficient to store energy as atomic vibration.
In solids, the quantitative limit of heat capacity in general is about 3 R per mole of atoms, where R is the ideal gas constant. This 3 R value is about 24.9 J/mole.K. Six degrees of freedom (three kinetic and three potential) are available to each atom. Each of these six contributes ¹⁄₂R specific heat capacity per mole of atoms.^[15] This limit of 3 R per mole specific heat capacity is approached at room temperature for most solids, with significant departures at this temperature only for solids composed of the lightest atoms which are bound very strongly, such as beryllium (where the value is only of 66% of 3 R), or diamond (where it is only 24% of 3 R). These large departures are due to quantum effects which prevent full distribution of heat into all vibrational modes, when the energy difference between vibrational quantum states is very large compared to the average energy available to each atom from the ambient temperature.
For monatomic gases, the specific heat is only half of 3 R per mole, i.e. (³⁄₂R per mole) due to loss of all potential energy degrees of freedom in these gases. For polyatomic gases, the heat capacity will be intermediate between these values on a per-mole-of-atoms basis, and (for heat-stable molecules) would approach the limit of 3 R per mole of atoms, for gases composed of complex molecules, and at higher temperatures at which all vibrational modes accept excitational energy. This is because very large and complex gas molecules may be thought of as relatively large blocks of solid matter which have lost only a relatively small fraction of degrees of freedom, as compared to a fully integrated solid.

Corollaries of these considerations for solids (volume-specific heat capacity)

Since the bulk density of a solid chemical element is strongly related to its molar mass (usually about 3 R per mole, as noted above), there exists a noticeable inverse correlation between a solid’s density and its specific heat capacity on a per-mass basis. This is due to a very approximate tendency of atoms of most elements to be about the same size, despite much wider variations in density and atomic weight. These two factors (constancy of atomic volume and constancy of mole-specific heat capacity) result in a good correlation between the volume of any given solid chemical element and its total heat capacity. Another way of stating this, is that the volume-specific heat capacity (volumetric heat capacity) of solid elements is roughly a constant. The molar volume of solid elements is very roughly constant, and (even more reliably) so also is the molar heat capacity for most solid substances. These two factors determine the volumetric heat capacity, which as a bulk property may be striking in consistency. For example, the element uranium is a metal which has a density almost 36 times that of the metal lithium, but uranium's specific heat capacity on a volumetric basis (i.e. per given volume of metal) is only 18% larger than lithium's.
Since the volume-specific corollary of the Dulong-Petit specific heat capacity relationship requires that atoms of all elements take up (on average) the same volume in solids, there are many departures from it, with most of these due to variations in atomic size. For instance, arsenic, which is only 14.5% less dense than antimony, has nearly 59% more specific heat capacity on a mass basis. In other words; even though an ingot of arsenic is only about 17% larger than an antimony one of the same mass, it absorbs about 59% more heat for a given temperature rise. The heat capacity ratios of the two substances closely follows the ratios of their molar volumes (the ratios of numbers of atoms in the same volume of each substance); the departure from the correlation to simple volumes in this case is due to lighter arsenic atoms being significantly more closely packed than antimony atoms, instead of similar size. In other words, similar-sized atoms would cause a mole of arsenic to be 63% larger than a mole of antimony, with a correspondingly lower density, allowing its volume to more closely mirror its heat capacity behavior.

Other factors

Hydrogen bonds

Hydrogen-containing polar molecules like ethanol, ammonia, and water have powerful, intermolecular hydrogen bonds when in their liquid phase. These bonds provide another place where heat may be stored as potential energy of vibration, even at comparatively low temperatures. Hydrogen bonds account for the fact that liquid water stores nearly the theoretical limit of 3 R per mole of atoms, even at relatively low temperatures (i.e. near the freezing point of water).

Impurities

In the case of alloys, there are several conditions in which small impurity concentrations can greatly affect the specific heat. Alloys may exhibit marked difference in behaviour even in the case of small amounts of impurities being one element of the alloy; for example impurities in semiconducting ferromagnetic alloys may lead to quite different specific heat properties.^[16]

The simple case of the monatomic gas

In the case of a monatomic gas such as helium under constant volume, if it is assumed that no electronic or nuclear quantum excitations occur, each atom in the gas has only 3 degrees of freedom, all of a translational type. No energy dependence is associated with the degrees of freedom which define the position of the atoms. While, in fact, the degrees of freedom corresponding to the momenta of the atoms are quadratic, and thus contribute to the heat capacity. There are N atoms, each of which has 3 components of momentum, which leads to 3N total degrees of freedom. This gives:

where

is the heat capacity at constant volume of the gas

is the molar heat capacity at constant volume of the gas

N is the total number of atoms present in the container

n is the number of moles of atoms present in the container (n is the ratio of N and Avogadro’s number)

R is the ideal gas constant, (8.3144621[75] J/(mol·K). R is equal to the product of Boltzmann’s constant and Avogadro’s number

The following table shows experimental molar constant volume heat capacity measurements taken for each noble monatomic gas (at 1 atm and 25 °C):

Monatomic gas	CV, m (J/(mol·K))	CV, m/R
He	12.5	1.50
Ne	12.5	1.50
Ar	12.5	1.50
Kr	12.5	1.50
Xe	12.5	1.50

It is apparent from the table that the experimental heat capacities of the monatomic noble gases agrees with this simple application of statistical mechanics to a very high degree.
The molar heat capacity of a monatomic gas at constant pressure is then

Diatomic gas

Constant volume specific heat capacity of a diatomic gas (idealised). As temperature increases, heat capacity goes from 3/2 R (translation contibution only), to 5/2 R (translation plus rotation), finally to a maximum of 7/2 R (translation + rotation + vibration)

In the somewhat more complex case of an ideal gas of diatomic molecules, the presence of internal degrees of freedom are apparent. In addition to the three translational degrees of freedom, there are rotational and vibrational degrees of freedom. In general, the number of degrees of freedom, f, in a molecule with n_a atoms is 3n_a:

Mathematically, there are a total of three rotational degrees of freedom, one corresponding to rotation about each of the axes of three dimensional space. However, in practice only the existence of two degrees of rotational freedom for linear molecules will be considered. This approximation is valid because the moment of inertia about the internuclear axis is vanishingly small with respect to other moments of inertia in the molecule (this is due to the very small rotational moments of single atoms, due to the concentration of almost all their mass at their centers; compare also the extremely small radii of the atomic nuclei compared to the distance between them in a diatomic molecule). Quantum mechanically, it can be shown that the interval between successive rotational energy eigenstates is inversely proportional to the moment of inertia about that axis. Because the moment of inertia about the internuclear axis is vanishingly small relative to the other two rotational axes, the energy spacing can be considered so high that no excitations of the rotational state can occur unless the temperature is extremely high. It is easy to calculate the expected number of vibrational degrees of freedom (or vibrational modes). There are three degrees of translational freedom, and two degrees of rotational freedom, therefore

Each rotational and translational degree of freedom will contribute R/2 in the total molar heat capacity of the gas. Each vibrational mode will contribute to the total molar heat capacity, however. This is because for each vibrational mode, there is a potential and kinetic energy component. Both the potential and kinetic components will contribute R/2 to the total molar heat capacity of the gas. Therefore, a diatomic molecule would be expected to have a molar constant-volume heat capacity of

where the terms originate from the translational, rotational, and vibrational degrees of freedom, respectively.

Constant volume specific heat capacity of diatomic gases (real gases). The behavior between 200 K and 1000 K is a range not large enough to both quantum transitions in all gases. Instead, at 200 K, all but hydrogen are fully rotationally excited, so all have at least 5/2 R heat capacity. (Hydrogen begins to fall below this value below room temp, but it will require cryogenic conditions for even H2 to fall to 1.5 R). In the other gases, only the heavier gases fully reach 7/2 R at the highest temperature, due to the relatively small vibrational energy spacing of these molecules. HCl and H2 begin to make the transition above 500 K, but have not achieved it by 1000 K, since their vibrational energy-level spacing is too wide to fully participate in heat capacity, even at this temperature.

The following is a table of some molar constant-volume heat capacities of various diatomic gases at standard temperature (25 ^oC = 298 K)

Diatomic gas	CV, m (J/(mol·K))	CV, m / R
H2	20.18	2.427
CO	20.2	2.43
N2	19.9	2.39
Cl2	24.1	3.06
Br2 (vapour)	28.2	3.39

From the above table, clearly there is a problem with the above theory. All of the diatomics examined have heat capacities that are lower than those predicted by the equipartition theorem, except Br₂. However, as the atoms composing the molecules become heavier, the heat capacities move closer to their expected values. One of the reasons for this phenomenon is the quantization of vibrational, and to a lesser extent, rotational states. In fact, if it is assumed that the molecules remain in their lowest energy vibrational state because the inter-level energy spacings for vibration-energies are large, the predicted molar constant volume heat capacity for a diatomic molecule becomes just that from the contributions of translation and rotation:

which is a fairly close approximation of the heat capacities of the lighter molecules in the above table. If the quantum harmonic oscillator approximation is made, it turns out that the quantum vibrational energy level spacings are actually inversely proportional to the square root of the reduced mass of the atoms composing the diatomic molecule. Therefore, in the case of the heavier diatomic molecules such as chlorine or bromine, the quantum vibrational energy level spacings become finer, which allows more excitations into higher vibrational levels at lower temperatures. This limit for storing heat capacity in vibrational modes, as discussed above, becomes 7R/2 = 3.5 R per mole of gas molecules, which is fairly consistent with the measured value for Br₂ at room temperature. As temperatures rise, all diatomic gases approach this value.

General gas phase

The specific heat of the gas is best conceptualized in terms of the degrees of freedom of an individual molecule. The different degrees of freedom correspond to the different ways in which the molecule may store energy. The molecule may store energy in its translational motion according to the formula:

where m  is the mass of the molecule and is velocity of the center of mass of the molecule. Each direction of motion constitutes a degree of freedom, so that there are three translational degrees of freedom.
In addition, a molecule may have rotational motion. The kinetic energy of rotational motion is generally expressed as

where I  is the moment of inertia tensor of the molecule, and is the angular velocity pseudo-vector (in a coordinate system aligned with the principle axes of the molecule). In general, then, there will be three additional degrees of freedom corresponding to the rotational motion of the molecule, (For linear molecules one of the inertia tensor terms vanishes and there are only two rotational degrees of freedom). The degrees of freedom corresponding to translations and rotations are called the rigid degrees of freedom, since they do not involve any deformation of the molecule.
The motions of the atoms in a molecule which are not part of its gross translational motion or rotation may be classified as vibrational motions. It can be shown that if there are n atoms in the molecule, there will be as many as   vibrational degrees of freedom, where is the number of rotational degrees of freedom. A vibrational degree of freedom corresponds to a specific way in which all the atoms of a molecule can vibrate. The actual number of possible vibrations may be less than this maximal one, due to various symmetries.
For example, triatomic nitrous oxide N₂O will have only 2 degrees of rotational freedom (since it is a linear molecule) and contains n=3 atoms: thus the number of possible vibrational degrees of freedom will be v = (3*3)-3-2 = 4. There are four ways or "modes" in which the three atoms can vibrate, corresponding to 1) A mode in which an atom at each end of the molecule moves away from, or towards, the center atom at the same time, 2) a mode in which either end atom moves asynchronously with regard to the other two, and 3) and 4) two modes in which the molecule bends out of line, from the center, in the two possible planar directions that are orthogonal to its axis. Each vibrational degree of freedom confers TWO total degrees of freedom, since vibrational energy mode partitions into 1 kinetic and 1 potential mode. This would give nitrous oxide 3 translational, 2 rotational, and 4 vibrational modes (but these last giving 8 vibrational degrees of freedom), for storing energy. This is a total of f = 3+2+8 = 13 total energy-storing degrees of freedom, for N₂O.
For a bent molecule like water H₂O, a similar calculation gives 9-3-3 = 3 modes of vibration, and 3 (translational) + 3 (rotational) + 6 (vibrational) = 12 degrees of freedom.

The storage of energy into degrees of freedom

If the molecule could be entirely described using classical mechanics, then the theorem of equipartition of energy could be used to predict that each degree of freedom would have an average energy in the amount of (1/2)kT  where k  is Boltzmann’s constant and T  is the temperature. Our calculation of the constant-volume heat capacity would be straightforward. Each molecule would be holding, on average, an energy of (f/2)kT  where f  is the total number of degrees of freedom in the molecule. Note that Nk = R if N is Avogadro's number, which is the case in considering the heat capacity of a mole of molecules. Thus, the total internal energy of the gas would be (f/2)NkT  where N  is the total number of molecules. The heat capacity (at constant volume) would then be a constant (f/2)Nk  the mole-specific heat capacity would be (f/2)R  the molecule-specific heat capacity would be (f/2)k  and the dimensionless heat capacity would be just f/2. Here again, each vibrational degree of freedom contributes 2f. Thus, a mole of nitrous oxide would have a total constant-volume heat capacity (including vibration) of (13/2)R by this calculation.
In summary, the molar heat capacity (mole-specific heat capacity) of an ideal gas with f degrees of freedom is given by

This equation applies to all polyatomic gases, if the degrees of freedom are known.^[17]
The constant-pressure heat capacity for any gas would exceed this by an extra factor of R (see Mayer's relation, above). As example C_p would be a total of (15/2)R/mole for nitrous oxide.

The effect of quantum energy levels in storing energy in degrees of freedom

The various degrees of freedom cannot generally be considered to obey classical mechanics, however. Classically, the energy residing in each degree of freedom is assumed to be continuous—it can take on any positive value, depending on the temperature. In reality, the amount of energy that may reside in a particular degree of freedom is quantized: It may only be increased and decreased in finite amounts. A good estimate of the size of this minimum amount is the energy of the first excited state of that degree of freedom above its ground state. For example, the first vibrational state of the hydrogen chloride (HCl) molecule has an energy of about 5.74 × 10⁻²⁰ joule. If this amount of energy were deposited in a classical degree of freedom, it would correspond to a temperature of about 4156 K.
If the temperature of the substance is so low that the equipartition energy of (1/2)kT  is much smaller than this excitation energy, then there will be little or no energy in this degree of freedom. This degree of freedom is then said to be “frozen out". As mentioned above, the temperature corresponding to the first excited vibrational state of HCl is about 4156 K. For temperatures well below this value, the vibrational degrees of freedom of the HCl molecule will be frozen out. They will contain little energy and will not contribute to the thermal energy or the heat capacity of HCl gas.

Energy storage mode "freeze-out" temperatures

It can be seen that for each degree of freedom there is a critical temperature at which the degree of freedom “unfreezes” and begins to accept energy in a classical way. In the case of translational degrees of freedom, this temperature is that temperature at which the thermal wavelength of the molecules is roughly equal to the size of the container. For a container of macroscopic size (e.g. 10 cm) this temperature is extremely small and has no significance, since the gas will certainly liquify or freeze before this low temperature is reached. For any real gas translational degrees of freedom may be considered to always be classical and contain an average energy of (3/2)kT  per molecule.
The rotational degrees of freedom are the next to “unfreeze". In a diatomic gas, for example, the critical temperature for this transition is usually a few tens of kelvins, although with a very light molecule such as hydrogen the rotational energy levels will be spaced so widely that rotational heat capacity may not completely "unfreeze" until considerably higher temperatures are reached. Finally, the vibrational degrees of freedom are generally the last to unfreeze. As an example, for diatomic gases, the critical temperature for the vibrational motion is usually a few thousands of kelvins, and thus for the nitrogen in our example at room temperature, no vibration modes would be excited, and the constant-volume heat capacity at room temperature is (5/2)R/mole, not (7/2)R/mole. As seen above, with some unusually heavy gases such as iodine gas I₂, or bromine gas Br₂, some vibrational heat capacity may be observed even at room temperatures.
It should be noted that it has been assumed that atoms have no rotational or internal degrees of freedom. This is in fact untrue. For example, atomic electrons can exist in excited states and even the atomic nucleus can have excited states as well. Each of these internal degrees of freedom are assumed to be frozen out due to their relatively high excitation energy. Nevertheless, for sufficiently high temperatures, these degrees of freedom cannot be ignored. In a few exceptional cases, such molecular electronic transitions are of sufficiently low energy that they contribute to heat capacity at room temperature, or even at cryogenic temperatures. One example of an electronic transition degree of freedom which contributes heat capacity at standard temperature is that of nitric oxide (NO), in which the single electron in an anti-bonding molecular orbital has energy transitions which contribute to the heat capacity of the gas even at room temperature.
An example of a nuclear magnetic transition degree of freedom which is of importance to heat capacity, is the transition which converts the spin isomers of hydrogen gas (H₂) into each other. At room temperature, the proton spins of hydrogen gas are aligned 75% of the time, resulting in orthohydrogen when they are. Thus, some thermal energy has been stored in the degree of freedom available when parahydrogen (in which spins are anti-aligned) absorbs energy, and is converted to the higher energy ortho form. However, at the temperature of liquid hydrogen, not enough heat energy is available to produce orthohydrogen (that is, the transition energy between forms is large enough to "freeze out" at this low temperature), and thus the parahydrogen form predominates. The heat capacity of the transition is sufficient to release enough heat, as orthohydrogen converts to the lower-energy parahydrogen, to boil the hydrogen liquid to gas again, if this evolved heat is not removed with a catalyst after the gas has been cooled and condensed. This example also illustrates the fact that some modes of storage of heat may not be in constant equilibrium with each other in substances, and heat absorbed or released from such phase changes may "catch up" with temperature changes of substances, only after a certain time. In other words, the heat evolved and absorbed from the ortho-para isomeric transition contributes to the heat capacity of hydrogen on long time-scales, but not on short time-scales. These time scales may also depend on the presence of a catalyst.
Less exotic phase-changes may contribute to the heat-capacity of substances and systems, as well, as (for example) when water is converted back and forth from solid to liquid or gas form. Phase changes store heat energy entirely in breaking the bonds of the potential energy interactions between molecules of a substance. As in the case of hydrogen, it is also possible for phase changes to be hindered as the temperature drops, so that they do not catch up and become apparent, without a catalyst. For example, it is possible to supercool liquid water to below the freezing point, and not observe the heat evolved when the water changes to ice, so long as the water remains liquid. This heat appears instantly when the water freezes.

Solid phase

Main articles: Einstein solid, Debye model, and Kinetic theory of solids

The dimensionless heat capacity divided by three, as a function of temperature as predicted by the Debye model and by Einstein’s earlier model. The horizontal axis is the temperature divided by the Debye temperature. Note that, as expected, the dimensionless heat capacity is zero at absolute zero, and rises to a value of three as the temperature becomes much larger than the Debye temperature. The red line corresponds to the classical limit of the Dulong-Petit law

For matter in a crystalline solid phase, the Dulong-Petit law, which was discovered empirically, states that the mole-specific heat capacity assumes the value 3 R. Indeed, for solid metallic chemical elements at room temperature, molar heat capacities range from about 2.8 R to 3.4 R. Large exceptions at the lower end involve solids composed of relatively low-mass, tightly bonded atoms, such as beryllium at 2.0 R, and diamond at only 0.735 R. The latter conditions create larger quantum vibrational energy-spacing, so that many vibrational modes have energies too high to be populated (and thus are "frozen out") at room temperature. At the higher end of possible heat capacities, heat capacity may exceed R by modest amounts, due to contributions from anharmonic vibrations in solids, and sometimes a modest contribution from conduction electrons in metals. These are not degrees of freedom treated in the Einstein or Debye theories.
The theoretical maximum heat capacity for multi-atomic gases at higher temperatures, as the molecules become larger, also approaches the Dulong-Petit limit of 3 R, so long as this is calculated per mole of atoms, not molecules. The reason for this behavior is that, in theory, gases with very large molecules have almost the same high-temperature heat capacity as solids, lacking only the (small) heat capacity contribution that comes from potential energy that cannot be stored between separate molecules in a gas.
The Dulong-Petit limit results from the equipartition theorem, and as such is only valid in the classical limit of a microstate continuum, which is a high temperature limit. For light and non-metallic elements, as well as most of the common molecular solids based on carbon compounds at standard ambient temperature, quantum effects may also play an important role, as they do in multi-atomic gases. These effects usually combine to give heat capacities lower than 3 R per mole of atoms in the solid, although in molecular solids, heat capacities calculated per mole of molecules in molecular solids may be more than 3 R. For example, the heat capacity of water ice at the melting point is about 4.6 R per mole of molecules, but only 1.5 R per mole of atoms. As noted, heat capacity values far lower than 3 R "per atom" (as is the case with diamond and beryllium) result from “freezing out” of possible vibration modes for light atoms at suitably low temperatures, just as happens in many low-mass-atom gases at room temperatures (where vibrational modes are all frozen out). Because of high crystal binding energies, the effects of vibrational mode freezing are observed in solids more often than liquids: for example the heat capacity of liquid water is twice that of ice at near the same temperature, and is again close to the 3 R per mole of atoms of the Dulong-Petit theoretical maximum.
For a more modern and precise analysis of the heat capacities of solids, especially at low temperatures, it is useful to use the idea of phonons. See Debye model. Phonons can also be applied to the heat capacity of liquids^[18]
The specific heat of amorphous materials has characteristic discontinuities at the glass transition temperature due to rearrangements that occur in the distribution of atoms.^[19] These discontinuities are frequently used to detect the glass transition temperature where a supercooled liquid transforms to a glass.^[20]

Table of specific heat capacities

See also: List of thermal conductivities

Note that the especially high molar values, as for paraffin, gasoline, water and ammonia, result from calculating specific heats in terms of moles of molecules. If specific heat is expressed per mole of atoms for these substances, none of the constant-volume values exceed, to any large extent, the theoretical Dulong-Petit limit of 25 J/(mol·K) = 3 R per mole of atoms (see the last column of this table). Paraffin, for example, has very large molecules and thus a high heat capacity per mole, but as a substance it does not have remarkable heat capacity in terms of volume, mass, or atom-mol (which is just 1.41 R per mole of atoms, or less than half of most solids, in terms of heat capacity per atom).
In the last column, major departures of solids at standard temperatures from the Dulong-Petit law value of 3R, are usually due to low atomic weight plus high bond strength (as in diamond) causing some vibration modes to have too much energy to be available to store thermal energy at the measured temperature. For gases, departure from 3R per mole of atoms in this table is generally due to two factors: (1) failure of the higher quantum-energy-spaced vibration modes in gas molecules to be excited at room temperature, and (2) loss of potential energy degree of freedom for small gas molecules, simply because most of their atoms are not bonded maximally in space to other atoms, as happens in many solids.

Notable minima and maxima are shown in maroon
Table of specific heat capacities at 25 °C (298 K) unless otherwise noted Substance	Phase	(mass) specific heat capacity cp or cm J·g−1·K−1	Constant pressure molar heat capacity Cp,m J·mol−1·K−1	Constant volume molar heat capacity Cv,m J·mol−1·K−1	Volumetric heat capacity Cv J·cm−3·K−1	Constant vol. atom-molar heat capacity in units of R Cv,m(atom) atom-mol−1
Air (Sea level, dry, 0 °C (273.15 K))	gas	1.0035	29.07	20.7643	0.001297	~ 1.25 R
Air (typical room conditionsA)	gas	1.012	29.19	20.85	0.00121	~ 1.25 R
Aluminium	solid	0.897	24.2		2.422	2.91 R
Ammonia	liquid	4.700	80.08		3.263	3.21 R
Animal tissue (incl. human)[21]	mixed	3.5			3.7*
Antimony	solid	0.207	25.2		1.386	3.03 R
Argon	gas	0.5203	20.7862	12.4717		1.50 R
Arsenic	solid	0.328	24.6		1.878	2.96 R
Beryllium	solid	1.82	16.4		3.367	1.97 R
Bismuth[22]	solid	0.123	25.7		1.20	3.09 R
Cadmium	solid	0.231	26.02			3.13 R
Carbon dioxide CO2[17]	gas	0.839*	36.94	28.46		1.14 R
Chromium	solid	0.449	23.35			2.81 R
Copper	solid	0.385	24.47		3.45	2.94 R
Diamond	solid	0.5091	6.115		1.782	0.74 R
Ethanol	liquid	2.44	112		1.925	1.50 R
Gasoline (octane)	liquid	2.22	228		1.64	1.05 R
Glass[22]	solid	0.84
Gold	solid	0.129	25.42		2.492	3.05 R
Granite[22]	solid	0.790			2.17
Graphite	solid	0.710	8.53		1.534	1.03 R
Helium	gas	5.1932	20.7862	12.4717		1.50 R
Hydrogen	gas	14.30	28.82			1.23 R
Hydrogen sulfide H2S[17]	gas	1.015*	34.60			1.05 R
Iron	solid	0.450	25.1[citation needed]		3.537	3.02 R
Lead	solid	0.129	26.4		1.44	3.18 R
Lithium	solid	3.58	24.8		1.912	2.98 R
Lithium at 181 °C[23]	liquid	4.379	30.33		2.242	3.65 R
Magnesium	solid	1.02	24.9		1.773	2.99 R
Mercury	liquid	0.1395	27.98		1.888	3.36 R
Methane at 2 °C	gas	2.191	35.69			0.66 R
Methanol (298 K)[24]	liquid	2.14	68.62			1.38 R
Nitrogen	gas	1.040	29.12	20.8		1.25 R
Neon	gas	1.0301	20.7862	12.4717		1.50 R
Oxygen	gas	0.918	29.38	21.0		1.26 R
Paraffin wax C25H52	solid	2.5 (ave)	900		2.325	1.41 R
Polyethylene (rotomolding grade)[25][26]	solid	2.3027
Polyethylene (rotomolding grade)[25][26]	liquid	2.9308
Silica (fused)	solid	0.703	42.2		1.547	1.69 R
Silver[22]	solid	0.233	24.9		2.44	2.99 R
Sodium	solid	1.230	28.23			3.39 R
Steel	solid	0.466
Tin	solid	0.227	27.112			3.26 R
Titanium	solid	0.523	26.060			3.13 R
Tungsten[22]	solid	0.134	24.8		2.58	2.98 R
Uranium	solid	0.116	27.7		2.216	3.33 R
Water at 100 °C (steam)	gas	2.080	37.47	28.03		1.12 R
Water at 25 °C	liquid	4.1813	75.327	74.53	4.1796	3.02 R
Water at 100 °C	liquid	4.1813	75.327	74.53	4.2160	3.02 R
Water at −10 °C (ice)[22]	solid	2.11	38.09		1.938	1.53 R
Zinc[22]	solid	0.387	25.2		2.76	3.03 R
Substance	Phase	Cp J/(g·K)	Cp,m J/(mol·K)	Cv,m J/(mol·K)	Volumetric heat capacity J/(cm3·K)

^A Assuming an altitude of 194 metres above mean sea level (the world–wide median altitude of human habitation), an indoor temperature of 23 °C, a dewpoint of 9 °C (40.85% relative humidity), and 760 mm–Hg sea level–corrected barometric pressure (molar water vapor content = 1.16%).
*Derived data by calculation. This is for water-rich tissues such as brain. The whole-body average figure for mammals is approximately 2.9 J/(cm³·K) ^[27]

Specific heat capacity of building materials

See also: Thermal mass

(Usually of interest to builders and solar designers)

Specific heat capacity of building materials
Substance	Phase	cp J/(g·K)
Asphalt	solid	0.920
Brick	solid	0.840
Concrete	solid	0.880
Glass, silica	solid	0.840
Glass, crown	solid	0.670
Glass, flint	solid	0.503
Glass, pyrex	solid	0.753
Granite	solid	0.790
Gypsum	solid	1.090
Marble, mica	solid	0.880
Sand	solid	0.835
Soil	solid	0.800
Sulphur Hexafluoride	gas	0.664
Wood	solid	1.7 (1.2 to 2.3)
Substance	Phase	cp J/(g·K)